Clearing The Shdsl Port Statistics; Handling Alarms And Traps - Access RAD ASMi-54 Installation And Operation Manual

Chapter 6 Diagnostics and Troubleshooting
Parameter
ES
UAS
SES
LOSWS
CRC Anomalies
Accumulated Time

Clearing the SHDSL Port Statistics

To clear all Ethernet and SHDSL statistics
•
To clear all SHDSL PCS and PME statistics:
•
To clear SHDSL PCS statistics:
•
To clear the SHDSL PME statistics:
•
6.3
ASMi-54 maintains a log file, which can hold up to 1,000 system messages. All
events are time-stamped.
Traps that are the result of events that were already reported by a different trap
may not be repeated. For example, LOC traps will not be sent if the physical layer
trap, such as LOS, was sent and the physical layer problem still exists.
The events are layered hierarchically, for example physical layer events/traps for
Loop Attenuation and SNR Margin are threshold triggered, so that an event/trap
is sent only if the threshold was exceeded.
Threshold can be configured for up to 8000 events per second.
6-18

Handling Alarms and Traps

Table 6-13. SHDSL PME Accumulated Data Statistics
In the Monitoring screen (see
SHDSL statistics.
In the SHDSL PCS Statistics screen (see
Statistics to clear all SHDSL PCS and PME statistics.
In the SHDSL PCS Statistics screen (see
SHDSL PCS statistics.
In the SHDSL PME Statistics screen (see
SHDSL PME statistics.
Handling Alarms and Traps
Description
The number of Errored Seconds (ES) on this endpoint since
it was last restarted.
The number of Unavailable Seconds (UAS) on this endpoint
since it was last restarted.
The number of Severely Errored Seconds (SES) on this
endpoint since it was last restarted.
The number of Loss of Sync Word (LOSW) Seconds on this
endpoint since it was last restarted
The number of CRC anomalies on this endpoint since it was
last restarted.
The time (in hundredths of a second) since the accumulated
counters were last re-initialized.
Figure 6-1
), press <C> to clear all Ethernet and
Figure 6-15
Figure 6-15
Figure 6-16
Installation and Operation Manual
), select Clear All SHDSL
), press <C> to clear the
), press <C> to clear the
ASMi-54 Ver. 1.0