Access RAD ASMi-54 Installation And Operation Manual page 20

Chapter 1 Introduction
Access to the ASMi-54 software can be limited to the ASCII terminal and
ConfiguRAD management by disabling the Telnet access.
The following functions are supported by the internal management software:
•
•
•
•
•
•
•
•
•
•
•
Timing
ASMi-54 operates with the following clock sources:
•
•
Diagnostics
Real-time alarms provide information on the system status, indicating
management failure, synchronization loss, and other conditions.
ASMi-54 also supports performance monitoring.
Event Log File
The Event Log file includes entries at the system and Ethernet levels.
Statistics
ASMi-54 provides statistics and counter capabilities in the physical Ethernet and
SHDSL level.
1-4 Overview
Local terminal, Telnet server, SNMP (V1), WEB server (ConfiguRAD)
ConfiguRAD is RAD's Web-based element management system for remote
device configuration and maintenance. ConfiguRAD is embedded in the unit
and can be accessed from any standard Web browser.
RADview-Lite
RADview-Lite is RAD's SNMP-based element management software, providing
SNMP traps, status polling, and configuration download. Remote element
management is available in either through the ConfiguRAD or Telnet.
Inband and out-of-band management with/without dedicated management
VLAN
Ping and Trace Routes
Remote software and configuration download / upload via TFTP
DHCP client to obtain IP address, mask and default gateway
Viewing system information
Modifying configuration and mode of operation, including setting system
default values and resetting the unit
Monitoring performance
Initiating connectivity tests
Upgrading software.
Internal clock source, derived from the modem as a CO unit
Received clock source, derived from the DSL line on a CPE unit.
Installation and Operation Manual
ASMi-54 Ver. 1.0