Entering Device Information - Access RAD ASMi-54 Installation And Operation Manual

Chapter 4
Configuration
This chapter describes how to configure the ASMi-54 for management and
operational tasks. Configuration screens are shown, and configuration
parameters explained.
Note
The configuration screens illustrated in this chapter are taken from a terminal
screen, but most of the menus are similar to those viewed in Telnet and
ConfiguRAD.
This chapter includes the following sections:
•
•
•
For a complete list of all menu items, see menu in
For instructions on accessing and navigating the screens, see
4.1
This section describes how to configure the ASMi-54 for management functions.

Entering Device Information

The ASMi-54 management software allows you to assign a name for the unit, and
specify its location to distinguish it from the other devices installed in your
system. A contact person can also be assigned. Each of these fields can hold up
to 50 characters.
To enter device information:
1. Select Main Menu>Configuration.
2. Select System.
3. Select Management.
4. Select Device Info.
ASMi-54 Ver. 1.0
Configuring for Management
Configuring for Operation
Additional Tasks.
Configuring for Management
The Configuration screen appears (see
The Configuration System screen appears (see
The Management screen appears (see
The Device Information screen appears (see
screen example). The description of the unit is factory set.
Chapter 3
.
Chapter 3
Figure 4-1
).
Figure 4-2
).
Figure 4-3
).
Figure 4-4
for a typical
Configuring for Management
.
4-1