Access RAD ASMi-54 Installation And Operation Manual page 67

Installation and Operation Manual
6. For VLAN Membership configuration (in Aware bridge only), see
7. Press <S> to save the changes.
Main Menu > Configuration > Applications
1. Bridge
2. QoS
ESC-Previous menu; !-Main menu; &-Exit
Main Menu > Configuration > Applications > Bridge
1.
2.
3.
4.
5.
6.
S - Save
ESC-Previous menu; !-Main menu; &-Exit
Parameter Possible Values
VLAN Mode Aware
Unaware
Filter
Forwarding
Mode Transparent
Aging Time 300...4080
(sec)
ASMi-54 Ver. 1.0
VLAN Membership
.
Figure 4-19. Applications Screen
VLAN Mode
Forwarding Mode
Aging time (sec) [300 – 4080]
Static MAC table
Bridge port
VLAN membership
Table 4-5. Bridge Parameters
Remarks
Forwarding is based on MAC address only or on VLAN+MAC.
• Aware – Bridge operates according to 802.1Q
• Unaware – Operates according to 802.1D.
Default: Unaware
Determines whether the bridge learns MAC addresses.
• Filter – Learning and filtering are enabled
• Transparent – No learning is performed. Each packet received is
forwarded to all other ports automatically, unless static MAC is
used.
Default: Filter
Aging time for entries in the MAC table. If the aging time elapses,
and no frame has been received from the MAC, it is erased from the
MAC table.
Default: 300 seconds
ASMi-54
>
>
ASMi-54
... (300)
[]>
Figure 4-20. Bridge Screen
Configuring for Operation
Chapter 4 Configuration
Configuring
(Aware)
(Filter)
>
>
4-17