Access RAD ASMi-54 Installation And Operation Manual page 65

Installation and Operation Manual
Parameter Possible Values
SNR Margin 0...15
Threshold (dB)
Configuring the SHDSL PME Current Margin
Only available in STU-R mode.
Note
To configure the SHDSL PME current margin:
1. Select Main Menu>Configuration>Physical Layer>SHDSL>PME Configuration.
2. Select Current Margin.
3. Select an item (1-32).
4. Press <S> to save the changes.
Configuring the SHDSL PME Worst Margin
Note Only available in STU-R mode.
To configure the SHDSL PME worst margin:
1. Select Main Menu>Configuration>Physical Layer>SHDSL>PME Configuration.
2. Select Worst Margin.
3. Select an item (1-32).
4. Press <S> to save the changes.
ASMi-54 Ver. 1.0
Remarks
The SNR margin alarm threshold.
Default: 0
The SHDSL PME Port Configuration screen appears (see
The SHDSL PME Current Margin screen appears (see
The SHDSL PME Port Configuration screen appears (see
The SHDSL PME Worst Margin screen appears (see
Chapter 4 Configuration
Figure 4-17
Figure 4-18
Figure 4-17
Figure 4-18
Configuring for Operation
).
).
).
).
4-15