Access RAD ASMi-54 Installation And Operation Manual page 92

Chapter 6 Diagnostics and Troubleshooting
Displaying the SHDSL PME Port Status
To display the SHDSL PME port status:
1. Select Main Menu>Monitoring>Physical Ports>SHDSL>Status.
2. Select PME Status.
3. Press <F> to select the PME number.
4. Press <F> to select the PCS number.
Main Menu > Monitoring > Physical Ports > SHDSL > Status > PME
Status
PME (Physical Medium Entity) Number
PCS (Physical Coding Sublayer) Number
Administrative Status
Operation Status
SHDSL PME State
SHDSL PME Rate
Current Noise Margin
Current Loop Attenuation
F-Forwards ; B-backwards
ESC-Previous menu; !-Main Menu; &-Exit
Parameter
PME (Physical Medium
Entity) Number
PCS (Physical Coding
Sublayer) Number
Administrative Status
Operation Status
SHDSL PME State
SHDSL PME Rate
Current Noise Margin
Current Loop Attenuation
6-6 Monitoring Performance
The SHDSL PCS Status screen appears (see
The SHDSL PMS Status screen appears (see
Table 6-4
are described in
Figure 6-9. SHDSL PME Status Screen
Table 6-4. SHDSL PME Status Parameters
Description
The SHDSL PME number to be handled.
The SHDSL PCS number to which the PME line belongs.
Whether the interface is enabled (up) or disabled (down).
The actual operational status of the SHDSL PCS
(Up or Down).
The current operational state
(PreActivation, Activation, or Data).
The actual PME rate (192...5696).
The current SNR margin for this endpoint (0...30).
The current loop attenuation for this endpoint (0...127).
Installation and Operation Manual
Figure 6-8
Figure 6-9
.
ASMi-54
(1)
(1)
(Up)
(Up)
(Data)
(5696kbps)
(19dB)
(0dB)
).
). The parameters
ASMi-54 Ver. 1.0