Resetting Asmi-54 - Access RAD ASMi-54 Installation And Operation Manual

Installation and Operation Manual
Main Menu > Utilities > File Transfer > TFTP
1. Server IP Address
2. Remote File name
3. File Type
4. Command
ESC-Previous menu; !-Main menu; &-Exit; ?-Help

Resetting ASMi-54

This section describes two types of reset functions:
•
•
•
Resetting to the Default Settings
You can reset the unit to its default settings.
To reset to the default settings:
1. Select Main Menu>Configuration>System.
2. Select Factory Defaults.
The device will restart with default configuration, proceed?
3. Press <Y> to confirm the reset.
ASMi-54 Ver. 1.0
Status
Error
Resetting configuration parameters to default settings
Overall reset of the device
Reset the PCS.
The Configuration System screen appears (see
The following message appears:
All parameters are reset to their default settings, and the unit is reset.
ASMi-54
(No operation)
(No error)
(0.0.0.0)
()
(Configuration)
>
Figure 4-36. TFTP Screen
(Y/N)
Chapter 4 Configuration
Figure 4-2
).
Additional Tasks 4-31