Clearing The Event Log File; Debugging Errors - Access RAD ASMi-54 Installation And Operation Manual

Installation and Operation Manual
Trap
TFTP Status
Status Change
SNR Margin Threshold Exceeded
Loop Attenuation Threshold
Exceeded

Clearing the Event Log File

To clear the Event Log file:
1. Select Main Menu>Monitoring>System>Event Log.
2. Press <C> to clear the Event Log file.
Are you sure you want to clear all alarms (Y/N)?
3. Press <Y> to clear or <N>to return to the Event Log screen.

Debugging Errors

You can debug errors when in Debug mode.
To debug errors:
•
ASMi-54 Ver. 1.0
Description
trap, the snmpEnableAuthenTraps object indicates whether this trap
will be generated.
This trap is sent whenever the status of TFTP changed.
This trap is sent whenever the state of the entity the agent is
responsible for changed.
Indicates that the SNR margin threshold (as per the
hdsl2ShdslEndpointThreshSNRMargin value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
indicates that the loop attenuation threshold (as per the
hdsl2ShdslEndpointThreshLoopAttenuation value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint.
The Event Log screen appears (see (see
The following screen appears:
Select Main Menu>Debug.
Chapter 6 Diagnostics and Troubleshooting
Figure 6-22
and
Handling Alarms and Traps
Figure 6-23
).
6-21