Access RAD ASMi-54 Installation And Operation Manual page 37

Chapter 3
Operation
This chapter provides the following information for ASMi-54:
•
•
•
•
•
For a detailed explanation of parameters on the menus, see
The installation procedures given in
before attempting to operate the ASMi-54.
3.1
To turn on the ASMi-54 unit:
•
ASMi-54 requires no operator attention once installed, with the exception of
occasional monitoring of front panel indicators. Intervention is only required
when the unit must be configured to its operational requirements, or when
diagnostic tests are performed.
3.2
The ASMi-54 LEDs are located on the front panels.
Front Panel Indicators
Figure 3-1
functionality of the ASMi-54 front panel LEDs.
ASMi-54 Ver. 1.0
Explains power-on and power-off procedures
Provides a detailed description of the controls and indicators and their
functions
Provides instructions for using a terminal connected to the ASMi-54 control
port
Describes how to navigate menus
Describes the configuration alternatives.
Turning On the Unit
Connect the power cord to the mains.
The PWR indicator lights up and remains lit as long as ASMi-54 receives
power.
Indicators
Figure 3-2
and
Chapter 2
show the typical front panel.
Chapter 4
must be completed and checked
Table 3-1
describes the
Indicators
.
3-1