Access RAD ASMi-54 Installation And Operation Manual page 70

Chapter 4 Configuration
To delete a factory-set bridge port configuration:
1. Select Main Menu>Configuration>Applications>Bridge.
2. Select Bridge Port.
3. Type the Bridge Port number.
Note
Bridge Port 1 is reserved for management.
4. Press <F> to toggle through the Bridge ports.
5. Press <D> to delete the configuration.
6. Press <S> to save the changes.
Main Menu > Configuration > Applications > Bridge > Bridge Port
1. Bridge port [1 – 6]
2. Bind
3. Activation
4. Ingress filtering
5. Accept frame type
6. Port VID / Stacking VID [1 – 4094]
7. Copy Origin Priority
8. Default Priority Tag [0-7]
9. Egress Tag Handling
10. Ingress Tag Handling
F-Forwards; B-Backwards; S - Save
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
4-20 Configuring for Operation
The Bridge screen appears (see
The Bridge Ports screen appears (see
Figure 4-23. Bridge Ports Screen
Installation and Operation Manual
Figure 4-20
).
Figure 4-23
).
ASMi-54
...(2)
(Eth-1)
(Enable)
(Disable)
(All)
...(3)
(Disable)
...(4)
(None)
(None)
ASMi-54 Ver. 1.0