Access RAD ASMi-54 Installation And Operation Manual page 54

Chapter 4 Configuration
Note
When Host Tagging is set to Tagged, two parameters are added to the menu:
Host VLAN ID and VLAN Priority.
5. Select Host VLAN ID to specify the host VLAN ID (1–4094).
6. Select VLAN Priority to specify the priority level for the host VLAN (0–7).
7. Press <S> to save the changes.
8. Return to the Host IP screen and press <S> to save the parameters.
Main Menu > Configuration > System > Management > Host IP
1. IP Address
2. Mask
3. Default gateway
4. Read community
5. Write community
6. Trap community
7. Encapsulation
S - Save
ESC-Previous menu; !-Main menu; &-Exit
Main Menu > Configuration > System > Management > Host IP >
Encapsulation
1
1. Host tagging
2. Host VLAN ID [1-4094]
3. Host Priority Tag [0-7]
S - Save
ESC-Previous menu; !-Main menu; &-Exit
4-4 Configuring for Management
Tagged – The host receives frames only when they are tagged with the
host's VLAN ID, and it sends frames to the bridge with this tag.
The default is Untagged.
Enter the number of the VLAN ID.
The changes are saved in the unit.
Figure 4-6. Encapsulation Screen
ASMi-54
... (172.17.143.140)
... (255.255.255.0)
... (172.17.143.1)
... (public)
... ()
... ()
>
Figure 4-5. Host IP Screen
ASMi-54
> (Tagged)
... (2)
... (0)
Installation and Operation Manual
ASMi-54 Ver. 1.0