Setting Management Access; Configuring The Network Managers - Access RAD ASMi-54 Installation And Operation Manual

Chapter 4 Configuration

Setting Management Access

To modify Telnet, SNMP, or WEB access permissions for a user:
1. Select Main Menu>Configuration>System>Management.
2. Select Management Access.
3. Select the access level you wish to change: Telnet Access, SNMP Access, or
4. Select the permission setting for this access level: Enable, Disable or Manage
5. Press <S> to save the changes.
Main Menu > Configuration > System > Management > Management
Access
1. User Access
2. Telnet Access
3. SNMP Access
4. WEB Access
ESC-Previous menu; !-Main menu; &-Exit

Configuring the Network Managers

The network management stations to which the SNMP agent sends traps can be
defined or modified. Up to ten managers can be defined. Entering the IP address
and corresponding subnet mask defines each management station. In addition,
you can temporarily prevent a manager station from receiving traps by masking
the network manager.
To edit the manager list:
1. Select Main Menu>Configuration>System>Management.
2. Select Managers List.
3. To add a new network manager, press <A> (Add).
4. Move the cursor to the Manager IP cell you wish to modify by pressing the
4-6 Configuring for Management
The Management screen appears (see
The Management Access screen appears (see
WEB Access.
Only.
The default is Enable.
The changes are saved in the unit.
Figure 4-9. Management Access Screen
The Management screen appears (see
The Management List screen appears (see
Tab key. The selected cell is highlighted and the value appears in the Change
cell field.
Installation and Operation Manual
Figure 4-3
).
Figure 4-9
ASMi-54
(Enable)
(Enable)
(Enable)
Figure 4-3
).
Figure 4-10
).
).
ASMi-54 Ver. 1.0