Chapter 6 Diagnostics and Troubleshooting
Main Menu > Monitoring > Physical Ports > Ethernet > Status
Port
Administrative Status
Operation Status
Speed & Duplex
Flow Control
F - Forwards; B - Backwards
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
Parameter
Port
Admistrative Status
Operation Status
Speed & Duplex
Flow Control
Displaying the SHDSL PCS Port Status
To display the SHDSL PCS port status:
1. Select Main Menu>Monitoring>Physical Ports.
2.
3. Select Status.
4. Press <F> to select the PCS number.
6-4
Monitoring Performance
Figure 6-6. Ethernet Status Screen
Table 6-2. Ethernet Status Parameters
Description
The port slot number to be handled.
Whether the interface is enabled or disabled.
The actual operational status of the link (Up or Down).
The current data rate and duplex mode of the link
(100 – full, 100 –half, 10 – full, or 10 - half).
Whether flow control is enabled or disabled.
The Monitoring Physical Ports screen appears (see
Select SHDSL.
The Monitoring Physical Ports - SHDSL screen appears
Figure 6-7
(see
).
The SHDSL PCS Status screen appears (see
Table 6-3
are described in
Installation and Operation Manual
ASMi-54
(1)
(Enable)
(Up)
(100Mbps – Full Duplex)
(Enable)
Figure 6-8
.
Figure 6-4
).
). The parameters
ASMi-54 Ver. 1.0