Changing User Name And Password - Access RAD ASMi-54 Installation And Operation Manual

Chapter 4 Configuration

Changing User Name and Password

From the User Level menu you can change the current user name and password.
ASMi-54 supports two user names and passwords.
settings supplied with the unit.
To change the current user name and password:
1. Select Main Menu>Configuration>System>Management>Management Access.
2. Select User Access.
3. Select User Level.
4. Select User Name, and enter a new user name.
5. Select Old Password, and enter the current password.
6. Select New password and assign a new password of up to eight characters to
Note
The password is case sensitive.
7. Select Confirm New Password to confirm the new password.
8. Press <S> to save the changes.
Main Menu > Configuration > System > Management > Management Access > User
Access
1. Change password
ESC-Previous menu; !-Main menu; &-Exit
4-28 Additional Tasks
Table 4-8. Default User Settings
User
1
2
The Management Access screen appears (see
The User Access screen appears (see
The User Level screen appears (see
The user name can be up to eight characters.
The default is 1234.
the new or existing user name.
If the new password is incorrect, an Illegal confirm password error message
appears. Reassign the new password.
The new password is saved.
>
Figure 4-32. User Access Screen
User Name Password
su 1234
user 1234
Figure 4-32
Figure 4-33
ASMi-54
Installation and Operation Manual
Table 4-8
lists the default user
Figure 4-9
).
).
).
ASMi-54 Ver. 1.0