Configuring Terminal Parameters - Access RAD ASMi-54 Installation And Operation Manual

Installation and Operation Manual

Configuring Terminal Parameters

The Terminal is connected to the Control Port. The management software allows
you to configure the terminal baud rate.
Note
The Baud Rate parameter is masked during a Telnet session.
To change the terminal baud rate:
1. Select Main Menu>Configuration>System.
2. Select Terminal.
3. Select Baud Rate.
4. Select the desired baud rate (9600, 19200, 115200).
5. Return to the Terminal screen and press <S> to save the changes.
Main Menu > Configuration > System > Terminal
1. Baud rate
S - Save
ESC-Previous menu; !-Main menu; &-Exit
Main Menu>Configuration>System>Terminal>Baud rate (19200 bps)
1. 9600 bps
2. 19200 bps
3. 115200 bps
ESC-Previous menu; !-Main menu; &-Exit
ASMi-54 Ver. 1.0
The Configuration System screen appears (see
The Terminal screen appears (see
The Baud Rate screen appears (see
The default baud rate is 9600.
The changes are saved in the unit.
Figure 4-7
Figure 4-8
ASMi-54
> (9600 bps)
Figure 4-7. Terminal Screen
ASMi-54
Figure 4-8. Baud Rate Screen
Configuring for Management
Chapter 4 Configuration
Figure 4-2
).
).
).
4-5