Access RAD ASMi-54 Installation And Operation Manual page 68

Chapter 4 Configuration
Using the Static MAC Table
Static MAC addresses are stored in the MAC table.
To add a static MAC address:
1. Select Main Menu>Configuration>Applications> Bridge.
2. Select Static MAC Table.
3. To add a static MAC address, press A (Add Entry).
4. In Add mode, perform the following:
5. Return to the Static MAC Table screen and press <S> to save the table.
Configuration > Applications > Bridge > Static MAC Table
1
| 2
v 3
4
5
1. MAC address ... (11-11-11-11-11-11)
C – Clears the table ; S – Save ; A – Add entry
ESC-Previous menu; !-Main menu; &-Exit; ?-Help
4-18 Configuring for Operation
The Bridge screen appears (see
The Static MAC Table screen appears (see
entries for a VLAN-aware bridge only.
The Static MAC Table screen display changes, as shown in
1. Select MAC Address, and enter a new MAC address.
2. Select VLAN ID, and choose a VLAN ID for the MAC address, 1-4094.
3. Select Receive Bridge Port, and choose the interface this MAC address
should be attached to.
4. Press <S> to save the MAC address.
5. Press <ESC> to return to the Static MAC Table screen.
VLAN ID
1
1
2
3
4
Figure 4-21. Static MAC Table Screen
Figure 4-20
ASMi-54
MAC address
11-11-11-11-11-11
22-22-22-22-22-22
33-33-33-33-33-33
44-44-44-44-44-44
55-55-55-55-55-55
Installation and Operation Manual
).
Figure 4-21
), with VLAN ID
Figure 4-22
Receive Bridge port
1
2
3
3
5
ASMi-54 Ver. 1.0
.