Access RAD ASMi-54 Installation And Operation Manual page 66

Chapter 4 Configuration
Main Menu > Configuration > Physical Layer > SHDSL > PME
Configuration > Current Margin
1. –10 dB
2. –9 dB
3. –8 dB
4. –7 dB
5. –6 dB
6. –5 dB
7. –4 dB
8. –3 dB
9. –2 dB
10. –1 dB
11. 0 dB (Disable)
12. 1 dB
13. 2 dB
14. 3 dB
15. 4 dB
16. 5 dB
>
ESC-Previous menu; !-Main menu; &-Exit
The SHDSL PME Worst Margin screen is the same as the SHDSL PME Current
Note
Margin screen except for the heading.
Configuring the Internal Bridge
The internal bridge connects the unit's ports. Configure the bridge for it to
properly process the VLAN tags to maintain priority of the data flows.
The bridge operates in transparent mode (learning is disabled) or filtered mode
(learning and filtering are enabled).
To configure the internal bridge:
1. Select Main Menu>Configuration.
2. Select Applications.
3. Select Bridge.
4.
5. For Bridge Port configuration, see
4-16 Configuring for Operation
Figure 4-18. SHDSL PME Current Margin Screen
The Configuration screen appears (see
The Applications screen appears (see
The Bridge screen appears (see
Table 4-5
described in
For Static MAC Table configuration, see
Installation and Operation Manual
ASMi-54
17. 6 dB
18. 7 dB
19. 8 dB
20. 9 dB
21. 10 dB
22. 11 dB
23. 12 dB
24. 13 dB
25. 14 dB
26. 15 dB
27. 16 dB
28. 17 dB
29. 18 dB
30. 19 dB
31. 20 dB
32. 21 dB
Figure 4-1
Figure 4-19
Figure 4-20
). The parameters are
.
Using the Static MAC Table.
Configuring the Bridge Ports.
).
).
ASMi-54 Ver. 1.0