Access RAD ASMi-54 Installation And Operation Manual page 34

Chapter 2 Installation and Setup
The ambient operating temperature is 0º–50ºC (32º–122ºF), at a relative
humidity of up to 90%, non-condensing.
2.3
The package contains the following items:
•
•
•
•
2.4
Hand Tools and Kits
ASMi-54 needs no special tools for installation. You need a screwdriver to mount
the unit in a 19-inch rack.
Power Cable
ASMi-54 comes equipped with an appropriate (country or region dependent)
power cord to be connected from the power socket on the rear panel to the
mains.
Cable and Connectors
Refer to the following table to determine what cables and connectors are
required for installation. For all connector pinouts, refer to
Interface
Control port
Fast Ethernet interface
SHDSL Interface
2-2 Equipment Needed
Package Contents
One ASMi-54 unit
AC power cord or DC adaptor connector
RM-35-2 kit for mounting in a 19" rack (if ordered)
Technical documentation CD.
Equipment Needed
Table 2-1. Required Connection Media
Cable/Connector
Straight RS-232/V.24 cable with DB-9 female connector
for ASCII terminal
RJ-45, 8-pin connection media
RJ-45, 8-pin connection media
Installation and Operation Manual
Appendix A .
ASMi-54 Ver. 1.0