Programming Private Phone Numbers - Visonic PowerMax10 User Manual

Fully supervised wireless alarm control system
Table of Contents

Advertisement

C.10 Programming Private Phone Numbers
The PowerMax10-G2 system allows you to determine which event groups will be reported to private telephone
subscribers. The PowerMax10-G2 system can also be programmed by the installer to report various event
messages such as alarm, arming or trouble, to 4 private telephone subscribers and to 4 SMS telephone
numbers either instead of or in addition to the reports transmitted to the monitoring company. You can
determine the number of times the private telephone number is dialed and whether to use a single
acknowledge signal or an acknowledge signal from each telephone before the current event is considered
reported.
Reported events and the number of reported attempts are programmed in the "Installer Settings" (for further
details see Chapter 6 in this manual).
♦ Here you can program the 1
messages to private subscribers.
♦ Here you can program the 1
messages to private subscribers.
Carefully read the section titled "Additional Information" according to the indicated references
at end of this section.
A. To Program Event Group Report
a) Enter the USER SETTINGS menu and select the [PRIVATE REPORT]
1
option.
b) When the display reads [PRIVATE REPORT] press
The display will read [REPORT TO PRVT].
c) Press
I
OK
Click the
group you wish to be reported, for example, "alarms".
Select between: "disable report"; "all"; "all (-op/cl)" (all messages except
opened/closed); "all (-alerts)" (all messages except alerts); "alarms";
"alerts"; "op/cl" (opened/closed).
When you are satisfied with the setting, press
A "Happy Tune"
B. To Program SMS Telephone Numbers
a) Click the
REPORT TEL#].
b) When the display reads [SMS REPORT TEL#] press
a) Click the
desired SMS phone number you wish to program or edit, for
example, "4th SMS tel #".
D-302757
st
nd
rd
, 2
, 3
, and 4
st
nd
rd
, 2
, 3
, and 4
.
or
button until the display reads the event
sounds to confirm the set event to be reported.
or
button until the display reads [SMS
or
button until the display reads the
2
MENUS AND FUNCTIONS
th
private telephone numbers for reporting alarm and other event
th
SMS telephone numbers for reporting alarm and other event
.
I
OK
I
OK
to confirm.
I
OK
.
PRIVATE REPORT
REPORT TO PRVT
all
alarms
6
REPORT TO PRVT
SMS REPORT TEL#
1st SMS tel#
1
etc – see table
I
OK
I
OK
or
I
OK
or
I
OK
or
29

Advertisement

Table of Contents
loading

Table of Contents