Paper In Output Bin Is Full. Remove Printed Paper - Samsung MultiXpress M5370 Series Service Manual

4. Troubleshooting
► Error Code
M3–2130
► Error message

Paper in output bin is full. Remove printed paper

► Symptom
There are too much paper in output bin tray.
► Troubleshooting method
1) Remove the paper on exit tray.
2) If this error occurs continually, check the following.
a) Check if the bin-full sensor and actuator is assembled correctly.
b) Check if the bin-full sensor is defective.
4-164 Copyright© 1995-2016 SAMSUNG. All rights reserved.