Table of Contents
Advertisement
3.3.9. Main Drive Unit
1. Remove the rear cover after removing 6 screws.
2. Unplug 4 connectors. Release the harness from its
holder.
3. Remove the regi clutch shield after removing 2 screws.
4. Remove the fixer for MP and Pick up clutch.
Copyright© 1995-2016 SAMSUNG. All rights reserved.
5. Release 3 clutches without unplugging harness.
NOTE
When replacing the clutch, unplug the harness. When
reassembling clutch and harness, refer to the below
information about the harness and clutch colors.
•
Registration Clutch
1) Clutch gear color : White
2) Harness color : Black / Black
•
MP Clutch
1) Clutch gear color : White
2) Harness color : Black / Gray
•
Pick-up Clutch
1) Clutch gear color : Black
2) Harness color : Gray / Gray
6. Remove the main drive unit after removing 7 screws.
3. Disassembly and Reassembly
3-25
Advertisement
Table of Contents
Troubleshooting
