Paper Jam In Tray 2; Paper Is Empty In Tray 2. Load Paper - Samsung CLX-6260FD Service Manual

► Error Code
H1–1210
► Error message

Paper jam in Tray 2

► Symptom
The jammed paper has occurred in the tray2.
► Troubleshooting method
1) Remove the jammed paper.
2) If the jammed paper occurs continually, check the followings.
a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part
or replace it.
b) Check if the actuator is assembled correctly.
3) If the pick up clutch is defective, replace it.
► Error Code
H1–1252
► Error message

Paper is empty in Tray 2. Load paper.

► Symptom
Paper is empty in Tray1
► Troubleshooting method
1) Take off the cassette. If there is no paper on the tray2, load the paper.
2) If the problem persists, check the following.
a) Check if the paper empty sensor is contaminated or defective. Replace it.
Copyright© 1995-2012 SAMSUNG. All rights reserved.
4. Alignment and Troubleshooting
4-51