Adjustment - Samsung MultiXpress M5370 Series Service Manual

4. Troubleshooting
Code Displayed Name
05-0100 Document Regi Clutch
05-0110 Document Motor Forward
05-0111 Document Motor Backward
05-0120 Document width1 Sensor
05-0130 Document Pickup Motor Forward
05-0131 Document Pickup Motor Backward
05-0140 Document Pickup Roller Detect Sensor
05-0210 Document Jig Test Low Speed Simplex
05-0230 Document Jig Test High Speed Simplex

4.5.5.4. Adjustment

Print Adjustment
•
Diagnostics > Adjustment > Print Adjustment > Automatic Adjustment
Purpose
Operation Procedure
4-58
To calibrate/adjust the lengths of vertical & horizontal image and image position automatically in
print engine.
1) Press "Paper Supply" button and select a tray.
2) Press "Paper Size" button and select a paper size of the previously selected tray.
3) Press "Print" button. A test pattern will be printed out.
4) Place the printed pattern on platen.
• The words "front side" on the chart face the glass
• The arrows face left edge of the platen
• Press "Scan 1"
5) Press "OK" button. Automatic scanning will occur .
6) Place the printed pattern on platen.
• The words "back side" on the chart face the glass
• The arrows face left edge of the platen
• Press "Scan 2"
7) Press "OK" button. Automatic scanning will occur .
8) The system will automatically calculate the proper value based on scanning result of the
test pattern.
9) The new values are set to the system.
Access
Start/Stop
Start/Stop
Start/Stop
High/Low
Start/Stop
Start/Stop
High/Low
Start/Stop
Start/Stop
Copyright© 1995-2016 SAMSUNG. All rights reserved.