Input System Failure #H1-1253 : Pull Tray 2 Out And Insert It - Samsung MultiXpress M5370 Series Service Manual

Table of Contents

► Error Code

► Error message

Input System Failure #H1-1253 : Pull Tray 2 out and insert it.

The paper is not fed from tray2.

► Troubleshooting method

1) Turn the machine off than on.

2) If the problem persists, turn the machine off.

3) Check if the connection between the tray 2 pick up drive and SCF board is correct.

4) If the connection is OK, replace the tray 2 pick up drive unit.

5) If the problem persists, check the following.

a) Remove the tray 2 pick up unit.

b) Check if the pick up sensor is contaminated, clean it.

c) If the pick up sensor is defective, replace it.

4. Troubleshooting