Table of Contents
Advertisement
4. Troubleshooting
► Error Code
U3–3411 / U3–3413 / U3–3414
► Error message
Original paper jam inside the scanner
► Symptom
Original jam has occurred around the scan in roller and regi roller. (Duplex path)
► Troubleshooting method
1) Open the RADF Cover-Open. And then, remove the jammed paper while pulling up the Guide-Pick Up Assy.
2) Check the duplex regi. actuator operation.
a) Check if the duplex regi. actuator operates normally.
b) Check the scan harness.
i) Open the Cover-Open.
ii) Remove 4 screw while pulling up the Guide-Pick Up Upper Assy.
4-204
Copyright© 1995-2016 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
