Samsung MultiXpress M5370 Series Service Manual page 409

Table of Contents

Hinge-left and Hinge-right have to be simultaneously replaced.

3) Execute Auto adjustment job for scan margin.

a) Enter the ADF adjustment menu in tech mode. (Picture 1)

(Diagnostics → Adjustment → ADF Adjustment)

b) Execute "Automatic Adjustment" using Adjustment chart. (Picture 2–1 ~ 2–3)

(Automatic Adjustment → Put the Adjustment chart on the DSDF Tray → Select OK)

4) Execute Shading Test

a) Enter the shading test menu in tech mode. (Picture 1)

(Diagnostics → Scanner Diagnostics → Shading Test)

b) Execute "Shading Test" using shading chart and check the result. (Picture 2–1 ~ 2–2)

Put the Shading chart on the DSDF Tray → Select Shade and Print Report (ADF)

Shading Chart is Xerox 4200 Letter size. (Don't use A4 paper)

4. Troubleshooting

Troubleshooting