Table of Contents
Advertisement
► Error Code
C9–2220
► Error message
TR Failure: #C9-2220. Install transfer roller again
► Symptom
The transfer roller is not installed properly.
► Troubleshooting method
1) Open the side cover.
2) Remove and reinstall the second transfer roller.
3) Close the side cover.
4) Enter SVC mode.
5) Select "TRNASFER" (INFORMATION > Supply Status > Field Replacement Unit > TRNASFER)
6) Select "T2 Roller". The "RESET" button will be activated. Click "RESET" to clear the T2 roller.
7) Exit SVC mode by pushing the home button.
Copyright© 1995-2016 SAMSUNG. All rights reserved.
4. Troubleshooting
4-105
Advertisement
Table of Contents
Troubleshooting
