Samsung MultiXpress M5370 Series Service Manual page 247

c) Subnet Mask: Network Subnet Mask for the device
-
Configure samba settings
a) Server IP : IP address of the server.
b) User ID : user ID of the server to login into the server system
c) Password : password of the server system
d) Shared folder : name of the shared folder on the server, where the packages for the system recovery
are present.
The Next button is pressed after providing the above information.
The system will establish the provided IP to the device and try to connect to the server and check for the available
packages on the server.
If Network is establish and all the packages are present in the shared folder of the server then the system will be
directed to the Confirmation page otherwise an Error page will be displayed with an appropriate error message.
5) When pushing "Next" button on option selection page, the confirmation page will be displayed.
6) When pushing "Next" button, progress page will be displayed.
7) When completing HDD Recovery or HDD Repair successfully, reboot the machine.
8) After rebooting, the machine will start the system initialization.
NOTE
If the system initialization is not executed, enter the svc mode and execute "Full memory clear".
If not, the machine may not work normally.
9) Execute the firmware update using the one ROM FW file after system initialization. This work is a must for all FW
module level.
Copyright© 1995-2016 SAMSUNG. All rights reserved.
4. Troubleshooting
4-69