Table of Contents
Advertisement
3. Disassembly and Reassembly
3.3.20.6. RADF SUB CORE ASSY
1. Unplug the harness on the RADF board. And then,
4. Remove 5 screws. And then, release the RADF Sub
release them from the harness holder.
Core Assy.
2. Remove 2 screws. And then, release the harness holder.
3. Remove 1 screw securing the ground wire.
3-58
Copyright© 1995-2016 SAMSUNG. All rights reserved.
Advertisement
Table of Contents
Troubleshooting
