Table of Contents
Advertisement
•
Diagnostics > Adjustment > Print Adjustment > Image Position
Purpose
Operation Procedure
•
Diagnostics > Adjustment > Print Adjustment > Print Test Patterns
This menu is to print out the test pattern manually.
Copyright© 1995-2016 SAMSUNG. All rights reserved.
Manually adjust printed image position on paper in print engine
1) Select a tray required adjustment.
2) Change the adjustment value with "+", "-" then press "OK" button to save changes.
•
Simplex Leading Edge
•
Simplex Side Edge
•
Duplex Leading Edge
•
Duplex Side Edge
NOTE
•
Adjustment must be done for each tray (tray1, tray2, tray3, tray4, MP).
•
It is recommended not to choose "ALL" for tray selection.
•
It is always better to adjust for a particular tray at each time.
•
Adjustment range : ± 4.0 mm
3) Print out the test pattern and check if the image is moved as you want. If not, repeat stpe2.
4. Troubleshooting
4-59
Advertisement
Table of Contents
Troubleshooting
