Replace With New Tray1 Pickup Roller; Replace With New Tray2 Pickup Roller; Replace With New Tray3 Pickup Roller; Replace With New Tray4 Pickup Roller - Samsung MultiXpress M5370 Series Service Manual

4. Troubleshooting
► Error Code
C9–1112
C9–1122
C9–1132
C9–1142
► Error message

Replace with new Tray1 pickup roller.

Replace with new Tray2 pickup roller.

Replace with new Tray3 pickup roller.

Replace with new Tray4 pickup roller.

► Symptom
The life of the pick up/reverse/forward roller for tray1,2,3,4 has expired.
► Troubleshooting method
1) Open the side cover.
2) Remove the cassette.
3) Lift small tap, remove the pick up / reverse/ forward roller.
4) Install the new pick up / reverse/ forward roller.
5) Enter SVC mode.
6) Select "Roller" (INFORMATION > Supply Status > Field Replacement Unit > Roller)
7) Select "P/up roller Kit-tray1~4". The "RESET" button will be activated. Click "RESET" to clear the corresponding
pick up roller.
8) Exit SVC mode by pushing the home button.
4-102 Copyright© 1995-2016 SAMSUNG. All rights reserved.