Western Digital Ultrastar Data60 User Manual page 157

User Guide
e. Slide the retention clip forward until it stops near the cable connector. Doing this will
ensure that the retention clip functions properly in the event the cable is pulled on for
some reason.
Step 41 : Install the second PSU.
Step 42 : Install Rear Fan
a. Orient the rear fan as shown in the following image.
b. Insert the rear fan into the housing as shown in the following image.
Figure 170: Cable Retention Mechanism
Figure 171: Cinching Cable Retention Clip
4. Part Replacement
4.9 Chassis Replacement
147