Western Digital Ultrastar Data60 User Manual page 101

4. Part Replacement
User Guide
4.7 CMA Replacement
Figure 85: Chassis Handle Operation
Step 21 : Perform this same action two more times without the drives loaded to make sure the rail kits are
installed properly.
Step 22 : Install the Drive Assembly.
a. Ensure that the enclosure has been pulled out of the rack until the rail latches engage.
b. Find the LED pointer on the top of the drive carrier. This pointer should point toward the
front of the unit as shown in the following image.
Figure 86: LED Pointer Orientation
91