Western Digital Ultrastar Data60 User Manual page 140

User Guide
Step 14 : Follow the previous step for each drive in the enclosure. Attach a label or mark the drives with
the drive slot they were removed from in order to add them to the same slot in the future. Store
the drives in an ESD safe location until the drives are ready to be installed back into an enclosure.
Step 15 : Uninstall the IOM(s).
a. Locate the latch release on the IOM and press it in the direction shown in the following
image.
b. Grasp both handles, one handle in each hand, and lift evenly with both hands to ensure
the IOM comes out straight. This will prevent any damage to the pins on the internal
connectors.
Figure 143: Removing Drive Assembly
Figure 144: Unlatching the IOM
4. Part Replacement
4.9 Chassis Replacement
130