Two Stack Configuration - Agilent Technologies 1290 Infinity User Manual

3
Installing the Module
Optimizing the Stack Configuration

Two Stack Configuration

In case the autosampler thermostat is added to the system, a two-stack
configuration is recommended, which places both heavy modules (1290
Infinity pump and thermostat) at the bottom of each stack and avoids high
stacks. Some users prefer the lower height of this arrangement even without
the autosampler thermostat. A slightly longer capillary is required between
the pump and autosampler. (See
page 35).
Figure 9
34
Recommended two stack configuration for 1290 Infinity with quaternary
pump (front view)
Figure 9 on page 34 and
1290 Infinity Quaternary Pump User Manual
Figure 10 on