Reserved Objects - Omron OMNUC G5 Series User Manual

9-8 Reserved Objects

The following objects are reserved. Do not use them.
Index
3120 hex
3121 hex
3122 hex
3123 hex
3124 hex
3125 hex
3126 hex
3127 hex
3312 hex
3313 hex
3314 hex
3317 hex
3321 hex
3432 hex
3433 hex
3435 hex
3436 hex
3703 hex
3818 hex
3822 hex
OMNUC G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Sub
0 Switching Mode in Speed Control
0 Gain Switching Delay Time in Speed Control
0 Gain Switching Level in Speed Control
0 Gain Switching Hysteresis in Speed Control
0 Switching Mode in Torque Control
0 Gain Switching Delay Time in Torque Control
0 Gain Switching Level in Torque Control
0 Gain Switching Hysteresis in Torque Control
0 Soft Start Acceleration Time
0 Soft Start Deceleration Time
0 S-curve Acceleration/Deceleration Time Setting
0 Speed Limit Selection
0 Speed Limit Value Setting
0 Positioning Completion Condition Selection
0 Positioning Completed Hold Time
0 Speed Conformity Detection Range
0 Rotation Speed for Motor Rotation Detection
0 Torque Limit Flag Output Setting
0 Position Command FIR Filter Time Constant
0 Origin Return Mode Setting

9-8 Reserved Objects

Name
9
9-50