Firmware - Cabletron Systems SmartCell 6A000 Reference Manual

Console Commands

Firmware

Use Firmware to re-program the switch application software when you want to perform a switch upgrade.
Operator
update
Parameters
Input Parameter Description
[ServerIP] IP address of server with the updated image
files.
[Path] Full pathname from server (directory) to image
files.
Description
Operator Parameters/Permissions
update [Server IP] <serverip>
firmware [Path] <path>
Administrator
Value/Field Size
dot decimal/
7-15 characters
n/a
Description
Updates the switch software (for example, when upgrading
your switch). You must know the full pathname of these
updated image files. The switch uses the TFTP protocol, so it
needs to be implemented on your server to complete this
command. You must then reboot your switch (see "Reboot")
for the new firmware to take effect. Reboot will not affect
your previous network configuration.
SmartCell 6A000/ZX-250 Reference Manual 2-55
Default
Last IP address
last path used