Cabletron Systems SmartCell 6A000 Reference Manual page 102

Operator Parameters/Permissions
delete [LECAddress/MACAddress/RouteDesc]
lecselanlec <clientatm/macaddress/routedescriptor>
Administrator
modify [LECAddress/MACAddress/RouteDesc]
lecselanlec <clientatm/macaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
show [ELANNumber] <elannumber>
lecselanlec
All
2-78 SmartCell 6A000/ZX-250 Reference Manual
Description
Removes a LANE client entry from an existing
ELAN on the LECS. The length of the address
(ATM, MAC, Route Descriptor) that you specify
determines which LANE client entry is deleted.
Changes the ELAN number of the
LECSELANLEC. You cannot modify the LECS
address, MAC address or Route Descriptor. The
[LECAddress/MACAddress/RouteDesc] input
parameter functions only as a pointer to the
relevant ELAN, so you can change the number of
the ELAN. That is the only thing you can modify
with this command. The only way to modify the
LECSELANLEC is to enter
and then enter
add lecselanlec,
addresses within that command.
Displays the LANE clients configured on an
existing ELAN on the LECS. You can see the
ATM and MAC addresses of LANE clients by
entering this command.
Console Commands
delete lecselanlec
adding the new