Cabletron Systems SmartCell 6A000 Reference Manual page 95

Console Commands
Description
Operator Parameters/Permissions
add [ClientNumber] <clientnumber>
laneclient [LanName] <lanname>
[ServerType] <servertype>
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
modify [ClientNumber] <clientnumber>
laneclient [LanName] <lanname>
[ServerType] <servertype>
[ServerAddress]
<serveraddress>
[IPAddress] <ipaddress>
[NetMask] <netmask>
[MTU] <maxtransferunit>
Administrator
show client [ClientNumber] <clientnumber>
All
Examples
switch_prompt # add laneclient
ClientNumber(0) :100
LanName(ELAN100):
ServerType(LECS):
ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01
IPAddress() :101.1.1.100
NetMask(255.0.0.0):
MTU(1516) :
switch_prompt #
switch_prompt # modify laneclient
ClientNumber(0) : 100
LanName(ELAN100): New100
ServerType(LECS):
ServerAddress() :39:00:00:00:00:00:11:11:11:11:11:11:11:00:11:22:22:44:55:01
IPAddress(101.1.1.100):
NetMask(255.0.0.0):
MTU(1516) :
switch_prompt #
Description
Creates a new LANE (LAN emulation) client to the switch.
Add a LANE client if you want to access the switch command
console using LANE.
Changes an existing LANE client on the switch.
Displays all or specified clients on the switch. Enter show
client to establish the different client types on the switch. See
"Client" for further details.
SmartCell 6A000/ZX-250 Reference Manual 2-71