Config - Cabletron Systems SmartCell 6A000 Reference Manual

Config

Use Config to erase the configuration information on the SmartCell ZX-250. Before using the
command, you should backup the switch configuration using the
Operator
clear, flush
Parameters
Input Parameter
none
Output Parameter
none
Description
Operator Parameters/Permissions
Administrator
clear
config
2-42 SmartCell 6A000/ZX-250 Reference Manual
Description
Description
backup switch
Value/Field Size
Description
Erases all switch configuration information, including
Ethernet interface address, VLAN and ELAN configurations,
signaling configuration, port configurations, and so on.
Console Commands
clear config
command. See page 200.
Default