Lecs - Cabletron Systems SmartCell 6A000 Reference Manual

LECS

Use LECS (local area network emulation configuration server) to manage the operational status of the LECS on the
network.
Operators
show, start, stop
Parameters
This command has no parameters. Just type
Descriptions
Operator Parameters/Permissions
show lecs All
Administrator
start lecs
Administrator
stop lecs
2p›F
The status of the LECS setting is persistent, so if you reboot the switch while you
have the LECS stopped, the LECS will continue to be stopped, even after
rebooting.You have to manually start the LECS again.
2-72 SmartCell 6A000/ZX-250 Reference Manual
or
start lecs stop lecs
Description
Displays LECS status.
Starts an LECS not previously started. If you have stopped an
LECS, you must restart it before adding ELANs to the LECS
or clients to the ELAN. You normally keep only one LECS in
your network, across all VLANs, ELANs, and switches.
Creating more than one LECS functionally splits the network
unless the databases are fully replicated.
Shuts down the LECS on the local switch.
at the switch prompt.
Console Commands