Console Commands
Shutdown
Use Shutdown to shut down the switch to a state where it can be powered off. It stops all logging and synchronizes the
file system. This must be run before turning off the switch.
Operator
shutdown
Parameters
This command has no parameters. Just type
Description
Operator
Parameters/Permissions
shutdown
Administrator
Example
switch_prompt # shutdown
Confirm(y/n)?: y
switch_prompt #
You can switch off the system now
at the switch prompt.
shutdown
Descriptions
After issuing this command, you will be prompted for
confirmation. Reply
or reset the switch. By comparison, use
only finished a console session.
to confirm; then you can safely power off
y
exit
SmartCell 6A000/ZX-250 Reference Manual 2-183
when you have
Need help?
Do you have a question about the SmartCell 6A000 and is the answer not in the manual?