Console Commands
LECSELANLEC
Use LECSELANLEC (LAN emulation configuration server emulated LAN LANE client) to manage the way LANE
clients are assigned to a specified ELAN on the LECS.
Operators
add, delete, modify, show
Parameters
Parameter
[LECAddress]
[MACAddress/
RouteDesc]
[ELANNumber]
Descriptions
Operator
Parameters/Permissions
add
[LECAddress] <clientatmaddress>
lecselanlec
[MACAddress/RouteDesc]
<clientmacaddress/routedescriptor>
[ELANNumber] <elannumber>
Administrator
Description
ATM address of the LANE client.
MAC (media access control) address/Route
Descriptor of the LANE client.
Number of the ELAN to which the LECS
belongs.
Value/Field Size
13-20 byte hex-based/
Up to 59 characters
SegId: 0-4095
Bridge Num: 0-15
0-127
Description
Adds a LANE client to an existing ELAN on the
LECS. The client must have a unique ATM and
MAC address for an entry to be accepted. You do
not have to specify both addresses, but whatever
you specify has to be unique. These addresses
must be added before entering this command
because you cannot modify these address
parameters once they are set. If modification is
needed, you must first enter
and then create another LECSELANLEC by
entering
add lecselanlec.
SmartCell 6A000/ZX-250 Reference Manual 2-77
Default
n/a
n/a
0
,
delete lecselanlec
Need help?
Do you have a question about the SmartCell 6A000 and is the answer not in the manual?