Cabletron Systems SmartCell 6A000 Reference Manual page 266

The display provides the following information:
U
Message index number — Display sequence number assigned by the console.
U
Event ID — Unique ID assigned to each event type at the factory.
U
Message Text — Description of the event.
U
Severity — Whether the event is critical, major, minor, or informational (Table B-2).
U
Time — Time the event occurred, with respect to switch up-time in hours, minutes, seconds, and
milliseconds.
Table B-2
Command Description
Critical Impacts the entire switch, leaving the system unavailable or in a degraded state.
Major Impacts a feature of the switch, leaving the feature unavailable or in a degraded state.
Minor Impacts the system or feature, leaving it in a sub-optimal state.
Informational An occurrence of an activity that the user knows about.
Following is an example of the console display following a show alarms command:
switch_prompt # show alarms
Index(ALL)
0 33554652 000:00:32:238
---------------------------------------------------
LECS Operational
The display provides the following information:
U
Message index number — Display sequence number assigned by the console.
U
Alarm ID — Same as event ID, described above.
U
Message Text — Description of the alarm.
U
Time — Time the alarm occurred, with respect to switch up-time in hours, minutes, seconds, and
milliseconds.
2p›F
For a switch activity that is reported both as an alarm and an event, the ID,
message text and time are identical in the event and alarm messages.
The event ID is an 8 or 9-digit decimal number that allows you to identify the source of the event or alarm. The first
five or six digits indicate the software module associated with the switch activity. The remaining digits identify the
specific type of activity. Table B-3 lists each software module and its prefix(es).
Appendix B-2 SmartCell 6A000/ZX-250 Reference Manual
Event Severity
:
Event/Alarm Messages