Cabletron Systems SmartCell 6A000 Reference Manual page 198

Example
switch_prompt # reboot
Rebooting will temporarily disrupt all connections through the switch
Are you sure this is what you want to do?
Confirm(y/n)?:y
SmartSwitch ZX Start-up Code
Cabletron Systems Inc.
Walking 1's test: passed
Quadword test: passed
Long word address test: passed
Long word address bar test: passed
Preparing to run Default Boot Load Software: 0
Enter 0 or 1 to override and force which Boot Load Software to run:
Default Boot Load Software0 Status Good
Boot Load Software0 Flash CRC checked OK
Copied Boot Load Software0 text into DRAMDefault Boot Load Software Good
SmartSwitch ZX Start-up Code Version 2.0.1, Feb 25 1998
Copyright 1997, Cabletron Systems Inc.
Boot Load Software0 Rev Number =
Boot Load Software1 Rev Number =
MAC address: 0 20 d4 28 f5 0
Number of contiguous MAC addresses, starting at this base: 80
CPU Board Details:
Board ID: 3 Board Revision: 0
Common DRAM Base Address: c0000000, Size:
CPU DRAM Base Address: e0000000, Size:
Switch Software Flash Base Address: 90000000, Size:
Press any key to exit to Boot Load Prompt:
02
=>go
Bypassing POST
Verifying Checksum of Switch Software...
Attaching network interface ei0... done.
Attaching network interface lo0... done.
0xe054f600 (tRootTask): flashFsLib: Initialized
Initializing Flash File-System
Initializing System
Initializing Hardware
Initializing Alarms, Logging and Tracing
Initializing ILMI
Initializing PM
Initializing Link Daemon
Initializing LANE Servers
NOTICE - 'ZLESSRV' ***** LES started *****
NOTICE - 'tZLinkStatus' Port A1
NOTICE - 'tZLinkStatus' Port A2
Initializing LANE & IP/ATM Client
NOTICE - 'tZLinkStatus' Port C1
Initializing Watchdog Timer
After ZKickWatchDog
Console task ID : 0xe04c4cb0
SmartSwitch Command Console
SmartSwitch Version 02.01(31) (c) Cabletron Systems Inc.
password:
The current user is
switch_prompt #
2-174 SmartCell 6A000/ZX-250 Reference Manual
7
7
CPU Speed: 33 MHZ.
8 MB.
32 MB.
(1) UP
(2) UP
(9) DOWN
Administrator
8 MB.
Console Commands