Exit - Cabletron Systems SmartCell 6A000 Reference Manual

Exit

Use Exit to disconnect your console connection from the switch.
Operator
exit
Parameters
There are no parameters for this command. Just type
Description
Operator Permission
exit [exit] <exit>
All
Example
switch_prompt # exit
Exiting SmartCell 2X Command Console
SmartCell 2X version 1.2(c) Cabletron Systems, Inc.
2-54 SmartCell 6A000/ZX-250 Reference Manual
at the switch prompt.
exit
Description
This command closes your console connection. Enter this
command when you are finished with a console session. If
you do not exit your session, the switch remains unavailable
to anyone else.
Console Commands