Route - Cabletron Systems SmartCell 6A000 Reference Manual

Console Commands

Route

Use Route to administer IP (internet protocol) route management to an ATM client through an Ethernet network. It
allows network management software to communicate across a network of switches.
Operators
add, delete, show
Parameters
Input Parameter
[DestNetIP]
[GatewayIP]
Output Parameter
[flags]
[Refcnt]
[Use]
[Interface]
Description
IP network number of a remote network.
IP address for gateway to the remote network.
Description
The flags field is a bitmask of different options:
•
0x1 – Route is usable ("up")
•
0x2 – Destination address is a gateway0x4 – Host-specific routing
entry
•
0x10 – Created dynamically by ICMP redirect
•
0x20 – Modified dynamically by ICMP redirect
Internal/debugging info.
Number of times this route has been used to send a packet.
Interface used for forwarding packets on this route.
Value/Field Size
dot decimal/
7-15 characters
dot decimal/
7-15 characters
SmartCell 6A000/ZX-250 Reference Manual 2-175
Default
NONE
NONE