Cabletron Systems SmartCell 6A000 Reference Manual page 53

Console Commands
Output Parameter
[LAN Type]
(</d>)
[MTU]
(</d>)
[IP NetMask]
(</d>)
Descriptions
Operator Parameters/Permissions
delete [ClientNumber] <clientnumber>
client
Administrator
restart [ClientNumber] <clientnumber>
client
Administrator
show client [ClientNumber] <clientnumber>
(/d)
All
Description
Type of ELAN.
Maximum transfer unit assigned for this client.
IP netmask assigned to the client.
Description
Removes a client from the switch.
Restarts a client from the switch. If a client fails to
successfully join a VLAN, you can restart the client to retry.
The switch software, on a periodic basis, automatically tries
to restart clients that have not successfully joined. Enter
to confirm that the client(s) have restarted.
client
Displays the details of a client on the switch. You can obtain
more details of all the clients on the switch by adding
the end of the command. For example,
show client /d
SmartCell 6A000/ZX-250 Reference Manual 2-29
show
to
/d
.