Sarstat - Cabletron Systems SmartCell 6A000 Reference Manual

SARStat

Use SARStat (segmentation and reassembly statistics) to view statistics from the SAR on the CPU port. This is useful
for debugging hardware problems.
Operator
show
Parameters
This command has no input parameters. Just type show sarstat at the switch prompt.
Output Parameter
[Rcv Pkts]
[RCV Byts]
[Raw Cell]
[Buf UF]
[FIFO OR]
[Max Len]
[Len Err]
[Crc Err]
[U Abrts]
[T1 Err]
[Chnl DVT]
[spur Int]
[Ttl Err]
[ISR Int]
[RQU Int]
2-178 SmartCell 6A000/ZX-250 Reference Manual
Description
Number of packets received since last up-time or clear.
Number of bytes received since last up-time or clear.
Number of raw cells received.
Number of underflow buffers received since last up-time or clear.
Number of first in, first out overruns received.
Maximum length of packet.
Number of packet-length errors received.
Number of packet-length errors received.
Number of user aborts received since last up-time or clear.
Number of T1 errors received since last up-time or clear.
Number of channel DVT (delay variation tolerance) indicators since last up-time or clear.
Number of spurious indicators since last up-time or clear.
Total errors received since last up-time or clear.
Total interrupts received.
Receive queue underrun indicator since last up-time or clear.
Console Commands