Community - Cabletron Systems SmartCell 6A000 Reference Manual

Community

Use Community to group NMS (network management system) hosts by privilege level. Hosts are collectively called
communities, and their privilege level determines the type of information access permitted by the switch. The switch
provides access to the information only if the request comes from a community configured with the necessary
privileges.
Operators
add, delete, show
Parameters
Input Parameter
[Name]
[IPAddr]
[Privilege]
Output Parameter
[Community Name]
2-40 SmartCell 6A000/ZX-250 Reference Manual
Description
SNMP community name. Needs to be
defined on the switch to access SNMP.
IP address of the host or hosts that can use
this community name. Entering 0.0.0.0
allows access by any host.
Privileges associated with this community. read, write, read-write/
Description
Same as [Name] input parameter.
Console Commands
Value/Field Size
64 characters
dot decimal/
7-15 characters
n/a
Default
NONE
NONE
read